72in Z Master® 6000
Description
Overview
When you cover a lot of ground, you need a machine that keeps up. Toro’s Z Master® 6000 Series fits the bill. This 183 cm (72 inch) packs the power and comfort you demand. From the powerful 31 hp Kawasaki® V-Twin engine, vibration-absorbing deluxe suspension seat to the high-strength steel TURBO FORCE® deck, it’s built to work hard and run at optimal levels.
Features
TURBO FORCE® Deck
Rugged, 7-gauge high-strength steel deck constructed to handle extreme conditions, delivering the ultimate in cutting performance.
High-Strength Blades
High-lift, flex-resistant, 0.63 cm thick blades are made of heat-treated steel for maximum durability and an outstanding cut every time.
Unibody Frame
Lighter and more durable frame. The frame is positioned lower to the ground, improving centre of gravity, balance and traction in most conditions. As an added perk, it’s made the machine easier to handle.
Twin Unitised Pump and Wheel Motors with Cooling Fans
Proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine. Transmissions are equipped with cooling fans.
Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
Operator Information Center
The easy to see instrument panel includes a digital hour meter, fuel gauge, voltage meter and diagnostics indicators for troubleshooting at a glance.
Specifications
| Engine |
31 hp (23.1 kW) Kawasaki® V-Twin FX921V 999 cc |
| Cutting Width |
183 cm |
| Drive Tyres |
24" x 12" - 12" Turf Master |
| Caster Tyres |
13" x 6.5" - 6", smooth tread, semi-pneumatic |
| Fuel Capacity |
45.4 litres |
| Maximum Forward Speed |
18.5 km/h |
| Deck Material |
TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper |
| Height of Cut |
1.0" - 5.5" in 0.25" increments |
| Deck Type |
Side discharge tools-free adjustable baffle |
| Rubber Discharge Chute |
Standard |
| Spindle Housing |
22.9 cm diameter cast aluminium |
| Spindle Bearings |
Maintenance-free ball bearings |
| Blades |
0.6 cm heat-treated steel |
| Blade Tip Speed |
18,500+ ft/min |
| Seat |
Deluxe suspension seat with arm rests with 3-D isolation mounts |
| Carrier Frame Construction |
3" x 1.5" x 10 gauge tubular steel |
| Warranty* |
5 years/1400 hours limited warranty and 5 years/1400 hours spindle limited warranty *See your certified Toro dealer for full details on warranties. |
